Pelton Turbine Manufacturer
Your One Stop Pelton Turbine Supplier

Pelton Turbine Generator
Manufacturer

Suneco Hydro is a Pelton Turbine generator manufacturer in China and 86% of our 100kw Pelton Turbine are exported to Europe, the US, Canada, Japan, Indonesia, Malaysia, the Philippines, Australia, Romania, South Africa, and Thailand. We provide customization service of all our mini, small, large hydro turbines. OEM samples of 100kw Pelton Turbine can be delivered in 15-25 working days. Other water turbines, Pelton turbines, small hydro turbines, mini-hydro turbines are all in our business scope.

All our Staff works with 20 years experience.

pelton turbine

2X200KW Pelton Turbine Hydraulic Electric Generator

The following picture shows 2x200kw hydraulic station upgraded by Suneco Hydro in China. Suneco Hydro has replaced a brand-new hydraulic turbine, generator and control system, and the output power of a single unit has been increased from 150KW to 200kW.

  • Power:200KW
  • Flow Rate:0.25m³/s
  • Water Head:103m
  • Price: Negotiable
  • Frequency: 50Hz/60Hz
china pelton turbine generators

Stainless Steel Pelton Turbine Wheel 30KW Hydroelectric Pelton Turbine Generator

Other considerations such as whether the turbine is expected to produce power under part-flow conditions, also play an important role in the selection. All turbines have a power-speed characteristic. They will tend to run most efficiently at a particular speed, head and flow combination.

  • Certificate:ISO9001/CE/TUV/From-E
  • Voltage: 400V
  • Efficiency: 90%
  • Generator Type: SF-W-30
china pelton turbine manufacturer

1200KW Hydroelectric Pelton Turbine Generator

The Pelton wheel is an impulse type water turbine and is designed so that the rim of the drive wheel—also called a runner, runs at half the speed of the water jet. This design has the water leaving the wheel with very little speed; thus extracting almost all of the water’s impulse energy—making it a very efficient turbine.

  • Speed:750rpm
  • Runner Material:Stainless Steel
  • Generator:Brushless Excitation
  • Generator type:SFW1200
china pelton turbine price

4100KW Generator Pelton Wheel Hydroelectric Pelton Turbine For HPP

The runner of the 4100KW turbine has undergone a dynamic balance check and direct injection structure. The stainless steel runner, spray needle and stainless steel sealing ring have all been nitrided.

  • Certificate: ]ISO9001/CE/TUV
  • Efficiency:]92%-95%
  • Generator Type:]SFW4500
  • Generator:]Brushless Excitation
china pelton turbines price cost

Hydropower Pelton Turbine Generator 1MW 2MW 5MW

The Pelton water turbine is an impulse type water turbine, extracting energy from the impulse of the moving water. The water is directed with high speed through nozzles against the buckets, arranged around the circumferential rim of a drive wheel – the runner. The shaft design can be either in horizontal position in combination with one or two nozzles per runner, or in vertical position with up to six nozzles per runner.

  • Output:1000KW—6000KW
  • Flow Rate:1.01m³/s—2.03m³/s
  • Water Head:150m—380m
  • Frequency:50Hz/60Hz
china pelton turbines

2200KW Hydro Power Pelton Water Wheel Turbine Generator

When used for generating electricity, there is usually a water reservoir located at some height above the Pelton turbine. The water then flows through the penstock to specialized nozzles that introduce pressurized water to the turbine. To prevent irregularities in pressure, the penstock is fitted with a surge tank that absorbs sudden fluctuations in water that could alter the pressure.

  • Rate Power:2200KW
  • Flow Rate: 0.527m³/s—1.47m³/s
  • Water Head:180m—500m
  • Frequency:50Hz/60Hz

250KW Stainless Seel Wheel Hydro Pelton Turbine For High Head HPP

This Pelton Turbine is one of 3X250KW hydro pelton turbine generators delivery are special designed for a distinguished guest from the Middle East. After many communications between our designer and his technical team, we finally determined an optimal solution.Looking forward to working with this distinguished guest again.

  • Output: 250KW
  • Flow Rate: 0.091m³/s
  • Water Head:350m
  • requency: 50Hz/60Hz

Leading Pelton Turbine Manufacturer

Develop Your Hydro Business with
Suneco Pelton Turbine

Suneco Hydro is high-tech hydropower, Pelton Turbine supplier, and hydropower project solution provider since 1983. We mainly supply hydroelectricity power system like 100kw hydro turbine generator, micro water turbines, Mini hydro turbine generators for our customers far from Grid electricity and need generating electricity from water, also some customers want to build hydropower plant and sell the electricity to local Grid-State.

A customer-made hydroelectric power station solution or home off-grid water turbine generator for personal power need is our strong point, Suneco micro-hydro generator ranging from 200W to 1000 KW for your project.

Contact Us For A Quick Quote


Complete Buying Guide: 100kw Hydro Turbine

Are you planning to set up an independent power project? Water may be an ideal source of power.

Buy hydro turbines, and you will be generating your electricity. 

One of the pieces of equipment that you will need is a 100kw hydro turbine.

This is a key device that will play a vital role in your electricity generation. 

This device is connected to the water flow, and it captures energy from a 10kwh hydro turbine.

100Kw hydro turbines are normally used by small-scale 100KW hydroelectric power or micro-hydro installations.

100kw hydro turbine

Design and installation of a 100kw hydro turbine

100kw hydro turbines may be designed for horizontal shaft or vertical shaft connection.

100kw electric generators may also have horizontally mounted runners, and vertically mounted runners and can even have a single runner design (vertical shaft) or double runner design (horizontal shaft). 

100kw hydro turbines are typically vertical axis, but they can also be horizontal axis design with a single or two runner set up depending on customer specifications.

china pelton turbine price

100kw hydro generation design is fairly simple, consisting of a penstock pipe, vortex finder & 100kwh hydroelectric 100kw hydro turbines.

How does a 100kw hydro turbine work?

100 KW generators run on water’s potential energy, converting it into mechanical energy and then electricity.

 It uses the kinetic energy of flowing water to produce mechanical motion, which is converted into electricity through an alternating current (AC) induction generator or synchronous generator.

100 kWh electricity is produced when 100 kW generator power 100Kwh hydroelectric 100kw hydro turbines and 10kw generators are connected to the grid.

 It also has a relatively high efficiency rate of about 70% to 80%. 100kW generator uses water’s kinetic energy by capturing it through 100kwh turbine generators, converting it into mechanical motion and then electrical energy. 

100kw generators are designed to rotate continuously in one direction because of their connection with 100kw electric motors.

Who needs a 100kw hydro turbine?

100 KW hydro turbines are ideal for remote areas where there is no electricity.   

100Kw models can be constructed and installed by individuals, businesses, or larger organizations to provide power during emergencies or for peak-power loads such as powering water pumps, refrigeration plants, or other 100 KWH hydroelectric 100kw generators.

 As long as you are looking for a reliable source of electricity, a 100kw hydro turbine will always come to your rescue. 

The situation will be better if you are near a water source as it will be easy to install and use your hydro turbine.

100KW generator is ideal for remote area residences, agricultural sites, or small businesses with limited electricity grids.

 Small 100kw hydroelectricity generators provide emergency backup energy during blackouts and unstable grid conditions.

It also helps you save on operation costs because they do not require fuel like gas or diesel plants. 

100 kW battery back-ups are also an effective solution for powering residential homes in electricity blackouts and unstable grid conditions. 

What are the components of a 100kw hydro turbine generator system?

The key components of a hydroturbine generator include;

Water turbine

This is a spindly vertical set of blades that are passed by the water stream.

The generator is connected to a shaft where the rotational energy produced is converted to electrical energy.

Generator

This converts the mechanical energy created by the turbine into electrical energy.

It is composed of several coils and electromagnetic devices such as magnets, rectifiers and diodes. 

Voltage controller of a  100kw water turbine generator

 This regulates power output to ensure that its safe for utilization in households or offices without causing damage to appliances and circuits within it.

Gearbox

 An important part of any hydropower system, this device enables smooth rotation from a slower source (in this case, water) into a faster one (the shaft).

Thus, it allows for the constant flow of electricity despite the rate of water flow.

Drive system

This is the mechanism that transmits the force that produces pressure to drive a hydraulic pump.

Assembly frame 

The frame does the work of keeping all the components together and in place. Its generally supported by concrete or steel legs

Control panel

The panel is used to monitor the power output of a hydroelectric turbine and its performance during use.

It also displays if any malfunctions could cause damage to the system from moisture, aged parts or poor installation.

Inverter

 A device connected to an electric circuit with primary voltage converts it into alternating current (AC) for commercial needs.

In addition, most household appliances utilize AC electricity, so this will be utilized as the final energy transfer. 

However, for large-scale hydro systems, AC output can be rectified to DC electricity before transmission to the electrical grid 

Rectifier: 

This component converts alternating current back into direct current, which is then stored for later use.

100kw hydro turbine layout

What is the cost of a 100kw hydro turbine price?

The costs per kilowatt to build a Hydroelectric (water) generator with an installed capacity of 1-100 kW depending on location range from as low as $200/kW to over $1000/kW.

The costs for larger projects are significantly higher due to the quantity and size of components that need to be purchased.

In addition, the costs will increase further if new roads or transmission lines need to be built and maintained.

The cost will also depend on the specifications of the components of the hydro turbine system.

china pelton turbines

Premium components will attract a high price tag.

You can find out the price of hydro turbines by directly contacting hydro turbine manufacturers and suppliers.

They will give you all the information regarding the price.

Can I get a customized 100kw  hydro turbine for sale? 

Yes, we can make a 100kw hydro turbine according to your requirements. 100kW hydroelectric power system hydropower

We support customers from the very beginning of the process.

We can provide technical consultation based on our years of manufacturing experience and help you choose the right products for your needs.

To ensure customer satisfaction, we offer 24 hours 7 days a week online service and offline technical support.

china pelton turbine generators

Should customers have questions or need help regarding their purchasing experience with us, they are welcome to contact us

Conclusion

In conclusion, it is clear that 100kw hydro turbine is a real deal when it comes to power generation.

Consider buying the best 100kw hydro turbine from reliable manufacturers and suppliers.

 

Send Your Enquiry